5T. LINEAR CABLE ENGINE

5T. LINEAR CABLE ENGINE 1
5T. LINEAR CABLE ENGINE 2
5T. LINEAR CABLE ENGINE 3
5T. LINEAR CABLE ENGINE 4
← Back

Technical Specification 5t. Linear Cable Engine

The lay-out of a LCE can be arranged in several ways, HICE has chosen for a split between the tensioner-part and the hydraulic power unit (HPU). This allows the HPU to be placed separately at some distance, which has the advantage of reduced noise and reduced space requirement on the work-deck. The tensioner-part is top loading to ease loading/unloading of cables and allows for simplified handling of end-connections and possible joints.

Dimensions LCE Length 4.6m
Width 1.6m
Height 1.3m
Weight in air 3.5t
Dimensions HPU Length 2.8m
Width 1.1m
Height 2.2m
Weight in air 2.4t
Power Supply 440 V, 60 Hz, 75 kW
Wheel pairs 5x wheel pair with wheel 620 mm/each
Wheel drive 10x hydraulic motors with individual gear boxes and hydraulic brakes
Working Pressure 280 bar
Line Tension Force 50kN (can be increased to 70kN)
Cable opening Min 0 mm/ Max. 450 mm
Speed control 0 – 50 m/minn (0 – 3,000 m/h)
Hydraulic drive with continuous variable speedand regulation in both directions
Operating modes Manual via Joystick
Constant speed
Constant tension
Wheel pairs can be opened, closed, started and stopped either simultaneously or seperately
Operations via remote control console c/w local and remote emergency stop
Tension measurement Permanently installed frame-mounted load-cell PAT Krüger with 0 – 10,000 kg capacity
Length measurement Temporarily installed frame-mounted wheel Hohner Encoder, HWI103S-2021R073-3600

 

 

 

Availabilty

Hulst Cable Equipment B.V.
Vierburenweg 9
9922 TE Westeremden
The Netherlands

Phone: +31 596 551 514
E-mail: info@hulstcableequipment.com

Machine renting

From
Till