Cable Tracks Hulst Innovation Cable Equipment has over the years built numerous systems and constructions to support cables of various weight and dimensions. This can be cable roller-tracks on/off-shore, cable-chutes used on key-sides or on offshore vessels for cable deployment or jointing and cable deployment bows, all of these can be built to specification. In … Continued
HPU’s In addition to the previously presented equipment, also custom built winches, electro-hydraulic power-packs, control panels can be delivered. Some examples of these are a combined HPU to supply different consumers with hydraulic pressure/flow or a number of simplified cranes with electrical winches for deployment of positioning beacons to the seabed.
Modulair Cable system (MCS) Compact Basket Carousel Design to suit Oil & Gas and Offshore Wind Umbilical/Cable Lay Markets. Mobilised with two lifts – 1st lift of base grillage and drive frames, 2nd lift of basket. Low Profile Circular Grillage optimises vessel deck space enhancing its suitability for smaller offshore wind installation vessels. TECHNICAL DETAILS … Continued
5T Bow Cable Engine The Smartquadrant – E bow cable engine has been designed to assist in loading of various cable types from fibre optic to medium sized power cables. The complete system consists out of two quadrants and one central electrically driven hydraulic power unit with a wired remote control. As the system is … Continued
Overal dimensions Length 1700 mm (approx. value) exclusive quadrants Width 1410 mm (approx. value) exclusive quadrants Height 2150 mm (approx. value) exclusive quadrants 90° side quadrants suitable for up to 5m bending radius Weight in air 5.5 t (approx. value) incl. quadrants Working load limit 15t (approx. value) solely related to cable weight Power Supply 380 V, 50 Hz, 32 … Continued
Technical Specification 5t. Linear Cable Engine The lay-out of a LCE can be arranged in several ways, HICE has chosen for a split between the tensioner-part and the hydraulic power unit (HPU). This allows the HPU to be placed separately at some distance, which has the advantage of reduced noise and reduced space requirement on … Continued
The lay-out of a LCE can be arranged in several ways, HICE has chosen for a split between the tensioner-part and the hydraulic power unit (HPU). This allows the HPU to be placed separately at some distance, which has the advantage of reduced noise and reduced space requirement on the work-deck. The tensioner-part is top … Continued